Overview - Radiator/Coolant Fan: Notes
WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Radiator
- Coolant Hose
- Lift the retaining clamp to remove
- Connecting. Refer to Figure- Replace the damaged clip -4-.
- O-ring
- Replace after removing
- Air Guide
- Coolant Hose
- Lift the retaining clamp to remove
- Connecting. Refer to Figure- Replace the damaged clip -4-.
- O-ring
- Replace after removing
- Radiator
- Removing and installing with the fan shroud. Refer to RADIATOR, REMOVING AND INSTALLING .
- Change the coolant after replacing
- O-ring
- Replace after removing
- Coolant Hose
- To the coolant reservoir
- To remove, press the release ring
- Connecting. Refer to Figure- Replace the damaged clip -4-.
- Coolant Hose
- To the coolant reservoir
- To remove, press the release ring
- Connecting. Refer to Figure- Replace the damaged clip -4-.
- O-ring
- Replace after removing
- Air Guide
- Coolant Hoses
- Bolt
- 4.5 Nm
- Radiator for the Charged Air Coolant Circuit
- Removing and installing. Refer to CHARGE AIR COOLING CIRCUIT RADIATOR, REMOVING AND INSTALLING .
- Retaining Pin
- Disengage and remove using screwdriver
- Rubber Bushing
- For the radiator
- Bolt
- 5.5 Nm
- Radiator Bracket
- Bolt
- 5 Nm
- Backing Plate
- Bolt
- 4.5 Nm