Fan Shroud, Coolant Fan
WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Coolant Fan 2 -V177-
- With Coolant Fan Control Module 2 -J671-
- Removing and installing. Refer to Coolant Fan -V7-, REMOVING AND INSTALLING .
- Coolant Fan -V7-
- With Radiator Fan Control Module -J293-
- Removing and installing. Refer to Coolant Fan -V7-, REMOVING AND INSTALLING .
- Fan Shroud
- Removing and installing. Refer to FAN SHROUD, REMOVING AND INSTALLING .
- Bolt
- 3.5 Nm
- Fan Wheel
- The bolt must lock into the hole.
- Bolt
- 5 Nm
- Fan Wheel
- The bolt must lock into the hole.
- Bolt
- 5 Nm
- Bolt
- 3.5 Nm