LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 951 (Engine Cooling System (Service Information - CREC, CREH)) >> 19 Cooling System >> Coolant Pump/Thermostat >> Coolant Thermostat, Removing And Installing >> Installing

Coolant Thermostat, Removing And Installing: Installing

WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following: 

NOTE:

Replace the seal after removal.

-- Install the right front coolant pipe. Refer to RIGHT FRONT COOLANT PIPE, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals