LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 951 (Engine Cooling System (Service Information - CREC, CREH)) >> 19 Cooling System >> Coolant Pump/Thermostat >> Coolant Pump, Removing And Installing >> Installing

Coolant Pump, Removing And Installing: Installing

WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following: 

-- Clean any oil or grease off the sealing surfaces.

-- Install the lock carrier cover. Refer to ATTACHMENTS, REMOVING AND INSTALLING .

-- Install the ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING, ACCESSORY RIBBED BELT .

NOTE:

Do not reuse used coolant.

-- Fill with coolant. Refer to FILLING .

scientia non olet · About LEMON Manuals