Upper Coolant Pipe, Removing And Installing: Removing

WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

During installation, all cable ties must be installed at the same location.

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

-- Remove the high pressure pipe. Refer to HIGH PRESSURE PIPE, REMOVING AND INSTALLING .

NOTE:

Use a cloth to catch any leaking coolant.

Courtesy of AUDI OF AMERICA, LLC

-- Open the clamp -2- and remove the coolant hose from the coolant pipe.

-- Remove the bolt -1- and remove the coolant pipe back out of the cylinder block -arrow-.