Right Front Coolant Pipe, Removing And Installing: Removing

WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the supercharger. Refer to SUPERCHARGER, REMOVING AND INSTALLING .

-- Remove the left front coolant pipe. Refer to FRONT LEFT COOLANT PIPE, REMOVING AND INSTALLING .

-- Remove the lock carrier cover. Refer to ATTACHMENTS, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- and air guide -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and the air guide -2- from the lock carrier.

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Ignore item -1-.

-- Open the clamp -1- and remove the coolant line.

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -2-.

-- Release the catches in direction of -arrows- and remove the Intake Manifold Runner Position Sensor -G336-.

-- Disconnect the connector -2-.

Courtesy of AUDI OF AMERICA, LLC

-- Open the clamp -1- and remove the coolant hose.

-- Remove the bolts -arrows- and the right front coolant pipe.