Fan Shroud and Coolant Fan Version 1

WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Fan Shroud And Coolant Fan (Version 1)

Courtesy of AUDI OF AMERICA, LLC

Coolant Fan Control Module
- Coolant Fan Control Module -J293- with Coolant Fan Control Module 2 -J671-
- Removing and installing. Refer to Coolant Fan Control Module -J293- / Coolant Fan Control Module 2 -J671-, REMOVING AND INSTALLING .
Screw
- 3.5 Nm
Bolt
- 5 Nm
Fan Shroud
- Removing and installing. Refer to FAN SHROUD, REMOVING AND INSTALLING, AUDI A7 .
Coolant Fan -V7-
- Removing and installing. Refer to Coolant Fan -V7- /Coolant Fan 2 -V177-, REMOVING AND INSTALLING, VERSION 1 .
Coolant Fan 2 -V177-
- Removing and installing. Refer to Coolant Fan -V7- /Coolant Fan 2 -V177-, REMOVING AND INSTALLING, VERSION 1 .
Bolt
- 5 Nm