LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 950 (Engine Cooling System (Service Information - CPNB)) >> 19 Cooling System >> Radiator/Coolant Fan >> Fan Shroud, Removing And Installing >> Fan Shroud, Removing And Installing, AUDI A7 >> Installing

Fan Shroud, Removing And Installing, AUDI A7: Installing

WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- Connect the coolant hose to the coupling. Refer to Figure.

-- Install the end plate and the lock carrier cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals