LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 950 (Engine Cooling System (Service Information - CPNB)) >> 19 Cooling System >> Radiator/Coolant Fan >> Auxiliary Cooler, Removing And Installing >> Installing

Auxiliary Cooler, Removing And Installing: Installing

WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following: 

NOTE:

Secure all hose connections with hose clamps of the same type as those equipped by the factory. Refer to the parts information.

All of the coolant must be changed if the radiator was replaced.

-- Install the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Check the coolant level. Refer to CHECK THE COOLANT LEVEL .

scientia non olet · About LEMON Manuals