Engine Coolant Temperature Sensor on Radiator Outlet -G83-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- The engine is cold.
-- Briefly open the coolant reservoir cap -arrow- to reduce the residual pressure in the coolant system.
-- Remove the front noise insulation. Refer to NOISE INSULATION .
-- Disconnect the connector -1-.
NOTE:
Use a cloth to catch any leaking coolant.
-- Remove the clamp -2- and the Engine Coolant Temperature Sensor on Radiator Outlet -G83-.