LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 950 (Engine Cooling System (Service Information - CPNB)) >> 19 Cooling System >> Coolant Pump/Thermostat >> Coolant Valve, Removing And Installing >> Check Valve, Removing And Installing, Cylinder Bank 1 (Right) >> Notes

Check Valve, Removing And Installing, Cylinder Bank 1 (Right): Notes

WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

This procedure contains mandatory replaceable parts. Refer to component overview and parts information prior to starting procedure.

Mandatory Replacement Parts 

NOTE:

The removing and installing procedure for models without a connection for the coolant hose is described here.