Fan Shroud, Removing And Installing: Removing

-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

-- Disconnect the connectors -1 and 2- from the coolant fan.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and air guide -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and the air guide -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Lift up the retaining clips -arrows- to remove the coolant line -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Free up and remove the coolant lines on the radiator from the lock carrier.

-- Open the clamp -2- and disconnect the coolant hose.

Courtesy of AUDI OF AMERICA, LLC

-- Press the coolant hose toward the rear.

-- Release the retaining tabs in direction of -arrows A- and remove the left and right air ducts -1- upward in direction of -arrow B-.

Courtesy of AUDI OF AMERICA, LLC

-- Release the left and right radiator retaining pins and remove by pulling upward in direction of -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Move the radiator slightly forward.

-- Press the fan shroud left and right locking tabs at the same time in direction of -arrow- and remove the fan shroud upward from the radiator.

Courtesy of AUDI OF AMERICA, LLC