Coolant Pump, Removing And Installing: Removing: Notes
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi A6 Quattro, 2017 Audi A6, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Required Preliminary Work. Refer to COOLANT PUMP, REMOVING AND INSTALLING .
-- Disconnect the connector -1- for the Oil Pressure Switch, Level 3 -F447- -2-.
-- Remove the bolts -arrows- and remove the toothed belt guard.
-- Remove the bolts -1 through 4-, and remove the coolant pump from the Engine Temperature Control Actuator -N493-.