Component Overview - Alloy Wheels

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Be careful not to scratch off the glued- on wheel trim on these rims.

The surface of the wheel trim is very sensitive.

The rim will have be replaced if the wheel trim is damaged.

The wheel trim cannot be replaced.

Courtesy of AUDI OF AMERICA, LLC

Light alloy wheels assembly overview.

Changing/mounting wheel, assembly information. Refer to WHEEL, CHANGING AND MOUNTING .

Courtesy of AUDI OF AMERICA, LLC

Tires
Valve
- Always replace
- Only install valve according to the parts information
Wheel
- Note assembly instructions. Refer to WHEEL, CHANGING AND MOUNTING
Wheel Bolt
- Refer to WHEEL BOLT TIGHTENING SPECIFICATIONS
- Note the assembly instructions. Refer to WHEEL, CHANGING AND MOUNTING .
- Anti-theft wheel bolts. Refer to Figure
Wheel Bolt Adapter
- Place on wheel bolt designed for it. Refer to Figure
Wheel Bolt Cover Cap
Cap
Wheel Bolt
NOTE:
Make sure the correct wheel bolts are installed. Refer to the parts information
- Note assembly instructions. Refer to WHEEL, CHANGING AND MOUNTING
- Refer to WHEEL BOLT TIGHTENING SPECIFICATIONS
Adhesive Balancing Weights
- Maximum 60 grams per rim flange permitted
- Clean wheel where it will be adhered so it is free of dirt and grease
- Remove protective film
- Attach balance weights to intended surfaces