Wheel Electronics, New Design
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Torque Wrench 1410:VAG1410 and Torque Wrench 1410 Insert - Accessory Kit:VAG1410/1
Union nut 4 Nm
-- Fold the valve -1- downward -arrow A- towards -arrow B-.
-- Slide the valve with the wheel electronics attached through the valve opening in the rim.
-- Rotate the union nut -arrow 2- three turns on the valve -arrow 1-.
-- Tighten the union nut -2- until the bar breaks with an audible snap.
NOTE:
Press the wheel electronics -1- firmly on the rim well at the same time so that it rests securely on the rim well.
-- Tighten the union nut to 4 Nm.