General Information

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

It is obligatory that the tire pressure label for the tire pressure be in the vehicle.

If there is no tire pressure label in the vehicle, one may be ordered from the parts information.

The correct adjustment of the axle geometry while performing a vehicle alignment is an important requirement for an optimal service life of the tire. Therefore, the adjustment of the axle geometry must lie within the specified tolerance range.

Information for the vehicle alignment. Refer to VEHICLE ALIGNMENT .

The running characteristics of the tire change in the course of normal wear. Rolling noises and vibrations can result from this. These are not damage in the sense of tire defects, but rather symptoms resulting from use. These can be corrected, at least partially, by specific measures. In certain cases, rolling noise cannot be completely eliminated.