Axle Alignment Specified Values, Sedan/AVANT Rear Axle
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The Specified Values Apply To All Engine Versions.
| FWD/AWD | ||||
|---|---|---|---|---|
| Steel Suspension, All Vehicles | Air Suspension, All Vehicles | |||
| Camber | - 1°20' ± 25' | - 1°20' ± 25' | ||
| Maximum permissible difference between both sides | 30' | 30' | ||
| Toe for each wheel | + 10 ± 5' | + 10 ± 5' | ||
| Total toe | + 20' ± 10' | + 20' ± 10' | ||
| Maximum permissible deviation in direction of travel relative to vehicle longitudinal axis | 10' | 10' |
Additional Vehicle Data For Vehicles With FWD And AWD:
This additional vehicle data only serves for a faster diagnosis in the case of accidents.
Table. Refer to SUSPENSION .