LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 946 (Wheels, Tires, Wheel Alignment & Collision Avoidance System (General & Service Information)) >> Wheels, Tires, Wheel Alignment >> Dynamic Steering >> Active Steering Control Module -J792-, Removing And Installing >> Overview - Active Steering Control Module -J792-

Overview - Active Steering Control Module -J792-

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
GWWA44-10161Courtesy of AUDI OF AMERICA, LLC

- Nut, 2.5 Nm 

- Bolt, 8 Nm 

- Active Steering Control Module -J792-

- Connector, clipped to the wiring harness

- Ground (GND) Wire

- Bracket