Wheels & Tires: Rims: Notes
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
The following information applies only to the Audi A6 model, type 4G, sedan and Avant (not for the A6 allroad). Not for Audi A7 Type 4G.
- When installing 19" wheels or larger an additional tank protective cover must be installed, part number :4G0.201.974.A . Refer to the Parts information.
- If the vehicle was delivered with 19" or larger wheels, this tank protective cover is already installed.
- Tank protective cover, part number :4G0.201.974.A
- Bolt:N.106.227.01
- Cable Tie:1J0.957.818.C only for vehicles with gasoline engine.
| Nm | Wheel Bolts | Hole circle in mm | Wheel hub in mm |
|---|---|---|---|
| 120 | 5 | 112 | 66.5 |
CAUTION:
Type 4F rims cannot be combined with type 4G rims.
- Type 4G inner diameter 66.5 mm, hole circle 112 mm, 5 wheel bolts, tightening specification 120 Nm
- Type 4F inner diameter 57 mm, hole circle 112 mm, 5 wheel bolts, tightening specification 120 Nm