Bumper Cover Mount COUNTERHOLDER, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Release the tabs -A- arrows and remove the air guide -1- -B arrow-.
-- Audi RS6: Remove the charge air cooling circuit and hang to the side with the lines attached. Refer to CHARGE AIR COOLING CIRCUIT RADIATOR, REMOVING AND INSTALLING [FOR ENGINE(S) CTGE, CEUC] and CHARGE AIR COOLING CIRCUIT RADIATOR, REMOVING AND INSTALLING [FOR ENGINE(S) CREC, CREH] .
-- Remove the bolt -1-.
-- Drill off the rivet heads -arrows-, strike the rivet shafts and remove the counterholder -2-.