Component Location Overview - Adaptive Cruise Control (Acc)
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Quick Release
- Always replace after removing
- Quantity: 3
- Retaining Plate
- Removing and installing. Refer to RETAINING PLATE FOR DISTANCE REGULATION CONTROL MODULES -J428- / -J850-, REMOVING AND INSTALLING .
- Screws
- 2.5 Nm
- Connector
- Check for damage, contact corrosion and water ingress, and service if necessary. .
- Cover
- Distance Regulation Control Module
- Right: Distance Regulation Control Module -J428-
- Left: Distance Regulation Control Module 2 -J850-
- Removing and installing. Refer to DISTANCE REGULATION CONTROL MODULES -J428- / -J850-, REMOVING AND INSTALLING .
- Clip
- Must always be replaced if the stud bolt -8- was removed.
- Replacing. Refer to CLIP ON Distance Regulation Control Module -J428- /Distance Regulation Control Module 2 -J850-, REPLACING .
- Stud Bolt
- Note the adjustment dimension. Refer to Installing .