LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 939 (Exhaust System, Emission Controls (CREC, Cred, CREH)) >> 26 Exhaust System, Emission Controls >> Secondary Air Injection System >> Combination Valve, Removing And Installing >> Right Combination Valve, Removing And Installing >> Installing

Right Combination Valve, Removing And Installing: Installing

WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install In Reverse Order Of Removal. Note The Following: 

NOTE:

Replace The Seal After Removal.

-- Electrical connections and wiring routing. Refer o the appropriate WIRING DIAGRAM.

-- Install the Throttle Valve Control Module -J338-. Refer to THROTTLE VALVE CONTROL MODULE -J338-, REMOVING AND INSTALLING .

-- Install the right catalytic converter. Refer to RIGHT CATALYTIC CONVERTER, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals