LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 939 (Exhaust System, Emission Controls (CREC, Cred, CREH)) >> 26 Exhaust System, Emission Controls >> Exhaust Manifold >> Overview - Exhaust Manifold >> Notes

Overview - Exhaust Manifold: Notes

WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exploded View Of Exhaust Manifold (CREC, CRED & CREH)
GWWA26-11704Courtesy of AUDI OF AMERICA, LLC
  1. Nut
    • Replace after removing
    • Coat the thread with hot bolt paste. Refer to the parts information.
    • Tightening specification and sequence. Refer to Figure, and Figure
  2. Bracket
    • For heat shield
  3. Exhaust Manifold
  4. Seal
    • Replace after removing
  5. Bolt
    • 9 Nm
  6. Heat Shield
  7. Washer
  8. Bolt
    • 9 Nm
  9. Heated Oxygen Sensor
  10. Nut
    • 23 Nm
    • Replace after removing
    • Coat the thread with hot bolt paste. Refer to the parts information.
  11. Seal
    • Replace after removing
scientia non olet · About LEMON Manuals