LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 939 (Exhaust System, Emission Controls (CREC, Cred, CREH)) >> 26 Exhaust System, Emission Controls >> Emissions Control >> Catalytic Converter, Removing And Installing >> Left Catalytic Converter, Removing And Installing >> Installing

Left Catalytic Converter, Removing And Installing: Installing

WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install In Reverse Order Of Removal. Note The Following: 

NOTE:

Replace Seals And Self-Locking Nuts After Disassembly.

-- Install The Steering Intermediate Shaft. Refer to STEERING INTERMEDIATE SHAFT, REMOVING AND INSTALLING .

-- Install the Oxygen Sensor 2 after Catalytic Converter -G131-. Refer to HEATED OXYGEN SENSOR 2 -G108- /OXYGEN SENSOR 2 AFTER CATALYTIC CONVERTER -G131-, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals