Secondary Air Injection Pump Motor -V101-, Removing And Installing: Notes
WARNING: This page is about a different car, the 2018 Audi S6, 2017 Audi S6, and 2016 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Hose Clamps - Up To 25mm :3094 for Audi RS6/RS7
- Hose Clip Pliers :VAS6362 for Audi RS6/RS7
CAUTION:
This Procedure Contains Mandatory Replaceable Parts. Refer To Component Overview And Parts Information Prior To Starting Procedure.
Mandatory Replacement Parts
- O-ring - Pipe for Secondary Air to Secondary Air Injection Pump Motor
- O-ring - Secondary Air Injection Pump Motor to Resonator