LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 938 (Exhaust System & Emission Controls System (Service Information - (CEUC, CRDB, CTGE, CWUB, CWUC)) >> 26 Exhaust System, Emission Controls >> Secondary Air Injection System >> Secondary Air Injection Pump Motor -V101-, Removing And Installing >> Installing

Secondary Air Injection Pump Motor -V101-, Removing And Installing: Installing

WARNING: This page is about a different car, the 2018 Audi S6, 2017 Audi S6, and 2016 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.

Install In Reverse Order Of Removal. Note The Following: 

NOTE:

Replace The O-Rings.

Secure All Hose Connections With Hose Clamps Of The Same Type As Those Equipped By The Factory.

-- Check the coolant level. Refer to CHECK THE COOLANT LEVEL .

scientia non olet · About LEMON Manuals