LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 938 (Exhaust System & Emission Controls System (Service Information - (CEUC, CRDB, CTGE, CWUB, CWUC)) >> 26 Exhaust System, Emission Controls >> Emissions Control >> Exhaust Door Control Units -J883 - / -J945-, Removing And Installing >> Removing

Exhaust Door Control Units -J883 - / -J945-, Removing And Installing: Removing

WARNING: This page is about a different car, the 2018 Audi S6, 2017 Audi S6, and 2016 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

The Exhaust Door Control Unit 2 -J945- Is Installed On The Driver's Side.

The Exhaust Door Control Unit -J883- Is Installed On The Passenger's Side.

Installation And Removal Is Described For The Exhaust Door Control Unit 2 -J945- On The Driver's Side.

-- Disconnect the connector -3-.

GWWA26-10994Courtesy of AUDI OF AMERICA, LLC

-- Lower the exhaust system rear section -4-.

-- Remove the nuts -2- and then remove the exhaust door control unit -1-.