Suspension Strut, Removing And Installing, Coil Spring Shock Absorber: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Place the vehicle on a hoist.
-- Remove the tower brace. Refer to TOWER BRACE, REMOVING AND INSTALLING .
-- Remove the bolts -arrows- and move the windshield washer fluid reservoir -1- slightly to the side.
-- Remove the wheel. Refer to WHEELS AND TIRES .
-- Secure the wheel bearing housing using a :T10038 -1-, as illustrated.