Suspension Strut, Removing And Installing, Coil Spring Shock Absorber: Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
-- Attach the steel spring damper to the body first.
-- Tighten the new nuts -arrows- diagonally.
Applies to Vehicles with DRC
-- Fill the DRC system. Refer to DYNAMIC RIDE CONTROL (DRC), DRAINING AND FILLING .
-- Install the wheel. Refer to WHEELS AND TIRES .