Pressing Out Bonded Rubber Bushing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of AUDI OF AMERICA, LLC
|
-- Mark the position of the "kidney" on the bonded rubber bushing on the control arm -arrows- as illustrated.
Use a waterproof felt-tip pen for marking.
 Courtesy of AUDI OF AMERICA, LLC
|
-- Install the special tools as shown in the illustration.
-- Remove the bonded rubber bushing from the control arm.