LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 936 (Suspension System (Front - Service Information)) >> Front Suspension >> Drive Axle >> Outer CV Joint, Checking >> Notes

Outer CV Joint, Checking: Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

It is necessary to disassemble the joint whenever replacing the grease or if the ball surfaces show wear or damage.

NOTE:

Ball hub and joint are paired and should be identified before removal. Do not interchange cage allocation.