Press Triple Roller Star Off of Drive Axle
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Use special tool shown in illustration.
- :T10065/1
- :T10065/5 - must touch the triple roller star base
- :VW401
- :VW408A
- :VW402
- The :T10065/5 must not touch the rollers; move the rollers to the side if necessary.
-- Pressing triple roller star off of drive axle.
-- Remove the protective boot.
-- Remove the grease on the shaft splines.
-- Check the roller body and ball cage for wear.
-- Clean drive axle and housing.