LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 936 (Suspension System (Front - Service Information)) >> Front Suspension >> Drive Axle >> CV Joint, Servicing >> Outer CV Joint, Removing

Outer CV Joint, Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
GWWA40-0486Courtesy of AUDI OF AMERICA, LLC

-- Clamp the drive axle with protective jaws in a vise clamp.

-- Open both clamping sleeves and remove protective joint boot from outer joint.

-- Strike a copper or brass drift -A- on CV joint inner race with a hammer.

-- Remove joint and protective joint boot.

scientia non olet · About LEMON Manuals