Overview - Sun Shade, Sedan
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 3 Nm
- Quantity: 4
- Clip
- Quantity: 4
- Insert in the front part of the rear shelf
- Remove any remaining clips in the body mounting points using the Omega Clip Tool :T40280 . To install, insert into the rear shelf.
- Replace damaged or deformed clips
- Front of Rear Shelf
- Removing and installing. Refer to REAR SHELF, REMOVING AND INSTALLING .
- Mount it on the sun shade and press on it until it audibly latches into place
- Trim
- For the sun shade guide strip
- Quantity: 2
- Removing and installing. Refer to D-PILLAR TRIM PANEL, REMOVING AND INSTALLING, SEDAN .
- Attach it to the guide strip and press on it until it engages audibly
- Guide Strip
- Quantity: 2
- Removing and installing. Refer to SUN SHADE, REMOVING AND INSTALLING, SEDAN .
- Mount it on the sun shade and press on it until it audibly latches into place
- Clip
- Quantity: 4
- Install in the guide strip
- Remove the clips that are still in the mounting points on the body using Omega Clip Tool:T40280 .
- Replace damaged or deformed clips
- Rear Shelf Rear Section
- Removing and installing. Refer to SUN SHADE, REMOVING AND INSTALLING, SEDAN .
- Install the sun shade with rear shelf in the rear window frame and tighten it down
- Trim Panel
- For the rear window frame
- Expanding Clip
- Quantity: 2
- Sun Shade
- Removing and installing. Refer to SUN SHADE, REMOVING AND INSTALLING, SEDAN .
- Clip into the back part of the rear shelf
- Install the sun shade with rear shelf in the rear window frame and tighten it down