Overview - Screen Separator
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Right 2/3 Rear Seat Backrest
- Screen Separator Wall
- Removing and installing. Refer to SCREEN SEPARATOR, REMOVING AND INSTALLING .
- Press all the way in
- Mount
- For the screen separator wall
- Quantity: 4
- Removing and installing. Refer to SCREEN SEPARATOR MOUNT, REMOVING AND INSTALLING .
- Attach the securing tabs to the lifting eyes in the openings on the body
- Cover
- For the mount
- Quantity: 4
- Removing and installing. Refer to SCREEN SEPARATOR MOUNT, REMOVING AND INSTALLING .
- Press on until it engages audibly
- Bolt
- 9 Nm
- Quantity: 4
- Screen Separator Bracket
- Quantity: 2
- Removing and installing. Refer to SCREEN SEPARATOR BRACKET, REMOVING AND INSTALLING .
- Bolt
- 6 Nm
- Quantity: 6
- Rubber Grommet
- For the screen separator bracket
- Quantity: 2
- Slide over the bracket and insert into the trim panel
- Bolt
- 9 Nm
- Quantity: 4
- Replace
- Clean the threaded hole with a thread tap.
- Install with locking compound. For the correct locking compound.
- Screen Separator Mount
- Quantity: 2
- Removing and installing. Refer to SCREEN SEPARATOR MOUNT, REMOVING AND INSTALLING .
- Guide
- For the mount on the right 2/3 of the rear seat backrest
- Quantity: 2
- Removing and installing. Refer to SCREEN SEPARATOR MOUNT, REMOVING AND INSTALLING .