Component Location Overview - Sound System, Sound Amplifier, Microphones, Bang & OLUFSEN, From My 2015
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- ANC Microphone with Retaining Plate
- Overview. Refer to COMPONENT LOCATION OVERVIEW - ANC MICROPHONES .
- Quantity: 4
- Trim
- Quantity: 4
- Wiring Harness Coupling
- Overview. Refer to COMPONENT LOCATION OVERVIEW - ANC MICROPHONES .
- Quantity: 4
- Nut
- Top: 5 Nm
- Bottom: 4 Nm
- Quantity: 3
- Bracket
- Bolt
- 5 Nm
- Digital Sound System Control Module -J525-
- Connector Assignment. Refer to the Appropriate Wiring Diagram.
- Removing and installing. Refer to Digital Sound System Control Module -J525-, REMOVING AND INSTALLING, BANG & OLUFSEN, FROM MY 2015 .
- Digital Sound System Control Module -J525-
- Bracket
- Bolt
- 4 Nm
- Quantity: 4
- Interior Microphone -R74-
- Overview. Refer to OVERVIEW - MICROPHONE UNIT .
- Front Interior Lamp -W1-
- With Microphone Unit in Front Roof Module -R164-
- Removing and installing. Refer to Front Interior Lamp -W1- /Front Passenger Reading Lamp -W13- /Driver Reading Lamp -W19-, REPLACING .
No illustration
- Brace bolts: 5 Nm