Front Display Front And Rear Cover, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the display with the kinematics:
- 6.5 inch. Refer to 6.5 INCH DISPLAY WITH KINEMATICS, REMOVING AND INSTALLING .
- 8 inch. Refer to 8 INCH DISPLAY WITH KINEMATICS, REMOVING AND INSTALLING .
First the Front Information Display Control Head -J685- is disconnected from the kinematics.
-- Follow the guidelines for electro-static discharge protection. Refer to FRONT DISPLAY FRONT AND REAR COVER, REMOVING AND INSTALLING .
-- Remove the mounting pin -3- and the bearing sleeve -4- from the display support -1-.
-- Remove the display support -1- from the kinematics -2-.
-- Unclip the rear cover -2- from the display support with display -1-.
-- Unclip the front cover -1- from the display support with display -2-.