Calibration Procedure

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

The following should not occur during the calibration procedure:

There must be no metal reflectors within a 2 m radius of the calibration device (for example, tool carts, metal cabinets).
Vehicle doors must not be opened or closed.
People must not sit in the vehicle.
People must not go between the vehicle and the :VAS6350/4 .