Light Switch -E1-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn the light switch to position "0".
-- Remove the instrument panel side cover. Refer to INSTRUMENT PANEL SIDE COVER, REMOVING AND INSTALLING .
-- Reach through the opening between the instrument panel and fuse panel C and push the light switch -2- out of the instrument panel cover -1- on the driver side in direction of -arrow-.
-- Disconnect the connector.