12 V Socket 3 -U19-, REPLACING: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- The release tabs -2- on the Cigarette Lighter Release Tool :T40148 must engage in the 12 V socket openings -3- in direction of -arrow-. To do so, the threaded rod -1- must be slid all the way down.
-- Open the mount cover -2- and hold it in that position.
-- Slide the :T40148 all the way into the 12 V socket -3-.
-- Turn the thumbwheel -1- on the :T40148 clockwise all the way to the end stop.
- The piston -2- is pulled upward and the release tabs -1- on the :T40148
spread in direction of -arrows-.
-- Remove the 12 V socket from the luggage compartment side trim panel.
-- Disconnect the connector.