Transmission, Removing, Vehicles With 4.0L TFSI Engine: Notes
WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Pry lever :80-200
- Engine and Gearbox Jack :VAS6931
- Hose Clip Pliers :VAS6362
- Tensioning Strap :T10038
- Gearbox Support :T40173
- Crankshaft Turning Tool :T40272
Preparing the :T40173
-- The bracket attached to -1- must be removed.
-- The bracket -2- must be turned so that the longer side faces up as illustrated.