LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 932 (Transmission System (Controls & Housing - Service Information - 8-Speed Automatic - 0BK AWD)) >> 37 Controls, Housing >> Selector Mechanism >> Gearshift Mechanism, Checking >> Notes

Gearshift Mechanism, Checking: Notes

WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

There is a risk of injury and accident from accidentally engaging a gear when the engine is running.

  • Shift the transmission into "P" and set the parking brake to lock the electro-mechanical parking brake before working on a running engine.
  • Pay attention to the safety precautions when driving. Refer to ROAD TEST WITH TESTING EQUIPMENT SAFETY PRECAUTIONS .
  • Perform all tests. If the specified values are not reached, adjust the selector lever cable (refer to SELECTOR LEVER CABLE, CHECKING AND ADJUSTING ) and perform "Guided Fault Finding"  using the Vehicle Diagnostic Tester.
scientia non olet · About LEMON Manuals