Measure the Length of the Bleed Pipe

WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Measure the Length of the Bleed Pipe on the Adapter For Oil Filling - :VAS6262A . Shorten it if necessary.

Courtesy of AUDI OF AMERICA, LLC

Shorten the pipe to dimension -a-. This assures the pipe on the adapter for oil filling :VAS6262A will not touch the bottom on some oil containers.

Dimension -a- = 210 mm

NOTE:

Dimension -a- is measured starting from the shaft (the green surface) on the :VAS6262A .

-- Make a mark on the bleed pipe, dimension a, and cut it, with the pipe cutter :VAS6056/2 .

Courtesy of AUDI OF AMERICA, LLC

-- Clean the :VAS6262A .