Tightening Specifications: Notes
WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Refer to OVERVIEW - AUTOMATIC TRANSMISSION FLUID (ATF) CIRCUIT .
- Crossbrace. Refer to FRONT AXLE .
Vehicles from MY 2014
-- Push the ATF line -1- all the way on the ATF supports until the catches are released and the clip is released.
-- Remove the ATF line.
-- Loosen the clamps -2 and 3- and then seal off and remove the coolant hoses :3094 .
-- Remove the bolts -arrows- and remove the ATF cooler.