Automatic Transmission Fluid (ATF) Cooler, Removing And Installing: Removing
WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the subframe crossbrace. Refer to SUBFRAME CROSSBRACE, REMOVING AND INSTALLING .
CAUTION:
The suspension components could be damaged.
- Do not rest the vehicle on its wheels if the subframe mount, the steering gear or the subframe crossbrace are not installed correctly.
-- Place the :SMN372500 under the transmission.
Vehicles through MY 2014
-- Remove the clamps -1 and 4- and disconnect the ATF pipes.
-- Loosen the clamps -2 and 3- and then seal off and remove the coolant hoses :3094 .
-- Remove the bolts -arrows- and remove the ATF cooler.