Transmission, Removing, Vehicles With 4-Cylinder FSI Engine: Notes
WARNING: This page is about a different car, the 2018 Audi A6, 2017 Audi A6, and 2016 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Pry Lever :80-200
- Hose Clamps - Up To 25 mm :3094
- Engine and Gearbox Jack :VAS6931
- Gearbox Support :T40173
- Tensioning Strap :T10038
- Counterhold - Vibration Damper :T10355
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview and parts information prior to starting procedure.
Mandatory Replacement Parts
- Bolts - Engine to transmission
- Bolts - Flywheel
- Bolts - Transmission fluid pump
- Gasket Front exhaust pipe
- Nuts - Front exhaust pipe
Preparing the :T40173 :
-- The bracket -arrow- must be turned so that the longer side faces up, as illustrated.