Vehicle with 4-Cylinder Engine (Three Bolts)
WARNING: This page is about a different car, the 2018 Audi A6, 2017 Audi A6, and 2016 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn the crankshaft on the vibration damper 120° in the direction of the engine rotation with a large offset open-end wrench.
-- With the crankshaft in this position, install the next bolt and tighten to 60 Nm.
-- Turn the crankshaft in another 120° the direction of engine rotation and install the next bolt and tighten to 60 Nm.
-- Turn the crankshaft another 120° the direction of engine rotation and tighten the last bolt to 60 Nm.