Special Tools
WARNING: This page is about a different car, the 2018 Audi A6, 2017 Audi A6, and 2016 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Used Oil Collection and Extraction Unit :SMN372500
- Tensioning Strap :T10038
- Puller - Two Arm Thrust Piece :T10040/3
- Counterhold - Vibration Damper :T10355
- Engine/Gearbox Jack - Gearbox Support :T10337
- Socket And Key :T40031
- Clutch Module Assembly Aid :T40169
- Clutch Module Transportation Lock :T40170
- Gearbox Support :T40173
- Oil Sump Assembly Pin :T40199
- Locking Button Removal Tool :T40203
- Crankshaft Turning Tool :T40257
- Wrench - 21mm :T40263
- Assembly Tool :T40305
- Adapter :T40314
- Torque Wrench 1332 Insert - Ring Wrench - 16mm :VAG1332/14
- Engine and Gearbox Jack :VAS6931
- Hose Clip Pliers :VAS6362
- Electronic Torque Wrench 3-60Nm :VAS6583
- Pressurized Gearbox Oil Filler Kit :VAS6617
with Pressurized Gearbox Oil Filler - Hand Pump :VAS6617/1
and Pressurized Gearbox Oil Filler - Adapter 2 :VAS6617/2
- Pry Lever :80-200
- Hose Clamps - Up To 25 mm :3094
- Trim Removal Wedge :3409
Tools Not Illustrated
- Cover :T40322
- Support :T40321
- Adapter VAS6617/12 :VAS6617/12