LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 930 (Transmission System (Controls & Housing - Service Information - 7-Speed Dual Clutch - 0CK)) >> 34 Controls, Housing >> SUBFRAME Mount >> Transmission Support With Transmission Mount, Removing And Installing >> Removing

Transmission Support With Transmission Mount, Removing And Installing: Removing

WARNING: This page is about a different car, the 2018 Audi A6, 2017 Audi A6, and 2016 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the tunnel crossmember. Refer to TUNNEL CROSSMEMBER, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- and the transmission support with the transmission mount from the transmission.

GWWA34-11239Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals