LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 930 (Transmission System (Controls & Housing - Service Information - 7-Speed Dual Clutch - 0CK)) >> 34 Controls, Housing >> Automatic Transmission Fluid >> ATF Level, Checking >> Assembling >> Notes

ATF Level, Checking: Assembling: Notes

WARNING: This page is about a different car, the 2018 Audi A6, 2017 Audi A6, and 2016 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

The ATF check and fill hole must be sealed off again before the ATF reaches 45 °C (113 °F).

-- Tighten the sealing plug for the inspection and fill hole. The ATF level test is now completed.

-- Install the noise insulation. Refer to NOISE INSULATION .

scientia non olet · About LEMON Manuals